Manuals / Vidikron / Computer Equipment / Projector

Vidikron 60 manual Audio In, Remote, CONTROL RS-232 IN/OUT, 8. Y/C, Video

Models: 60

1 51

Download 51 pages 33.6 Kb

Page 13

Image 13

CONTROLS AND FEATURES

5.AUDIO IN

Not used.

6.REMOTE

When the remote control is unable to work due to rear projection etc., the [REMOTE] terminal can be used to connect an external sensor to the projector. The external sensor is not generally sold. Check with your authorized Vidikron dealer.

7. CONTROL RS-232 IN/OUT

This is the RS-232 OUT interface-specific terminal. The projector can be controlled by a computer connected externally. More than one projector can be controlled using both the [RS-232 IN] and [RS-232 OUT] terminals.

8. Y/C

This is the input terminal for Y/C (S-Video) signals. Connect this terminal to the S-Video output terminal of a video deck, etc.

9. VIDEO

This is an input terminal for composite video signals. Connect this terminal to the composite video output terminal of a VCR, etc.

Page 13

Image 13

Vidikron 60 manual Audio In, Remote, CONTROL RS-232 IN/OUT, 8. Y/C, Video

Contents

Version D - I L A P R O J E C T O RTABLE OF CONTENTS » Contents of the package » The features you’ll enjoy includeINTRODUCTION » Introduction to the Vidikron Vision Model 60 D-ILA ProjectorIMPORTANT SAFEGUARDS SAFETY PRECAUTIONSIMPORTANT INFORMATION NOTICE For USAa When the power supply cord or plug is damaged IF IN DOUBT POWER CONNECTIONCONSULT A COMPETENT ELECTRICIANThere is no problem with ordinary video cassette playback images WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY LIMITED WARRANTYWHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY For Projectors, Video Processors and ControllersIMPORTANT WARRANTY REGISTRATION EFFECTIVE WARRANTY DATECONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE VIDIKRON Attn Customer Service Department 2900 Faber StreetTo Open the Projector Cover CONTROLS AND FEATURES » Projector Chassis CoverTo Close the Projector Cover 7. POWER BUTTON 3. POWER BUTTON15. KEY RESET BUTTON » Control Panel on the Projector1. Input Terminal » Connector Panel2. RGB1 3. DVI RGB36. REMOTE 5. AUDIO IN7. CONTROL RS-232 IN/OUT 8. Y/CCONTROLS AND FEATURES » Remote Control3. DIRECT ACCESS BUTTONS 1. IR OUTPUT INDICATOR2. ON 4. OFF12. PC 16x9 BUTTON 24. KEY RESET BUTTON13. PC 4x3 BUTTON 14. ENT Enter BUTTON» Installing the Projector against the Screen INSTALLING THE PROJECTORThrow Distance Chart Screen Installation» Projection Distance and Screen Size 169 and 43 Screen» Signals that can be input into the projector CONNECTING TO VARIOUS DEVICESVideo Signals 1 Response to Decoder 2 Responds to double density*5, high-vision signalsAllowable input signals HDCP compatible signalCONNECTING TO VARIOUS DEVICES Connecting to Video Devices » Connecting to DevicesPrepare cables for connecting the devices Connecting to ComputersThoroughly read the manual that comes with the computer used Please request a connection cable from us if needed Control from External DeviceFor more information, please contact your authorized Vidikron dealer Connecting the Power Cord Supplied BASIC OPERATION BASIC OPERATION 1 MUTE 2 PAUSE 3 KEYSTONE 4 AUTO ADJ » Frequently Used Convenient FunctionsUsing the Auto Adjust function for automatic adjustments The Auto Adjust functionWhen video input is selected ADJUSTMENT AND SETTINGS USING MENUS» Menu Structure ADJUSTMENT AND SETTINGS USING MENUS » When RGB input is selectedADJUSTMENT AND SETTINGS USING MENUS » When no image signal is inputtedADJUSTMENT AND SETTINGS USING MENUS » Menu Operation ButtonsThe main menu is displayed on the screen » The Procedure for Menu Operation 1. Press the MENU buttonADJUSTMENT AND SETTINGS USING MENUS » The Menu ConfigurationADJUSTMENT AND SETTINGS USING MENUS ADJUSTMENT AND SETTINGS USING MENUS » Setting the “Aspect Ratio” SETTING “ASPECT RATIO” AND “RESIZE”1. Project the image onto the screen 2. Press the MENU button5. Select “Letterbox” with the cursor buttons 6. Press the MENU button to end when adjustment is completedThe “Aspect Ratio” to “Letterbox” for optimum projected image The menu disappears from the screen4. Select “Resize” with the cursor buttons / and press ENTER » Setting the “Resize”1. Project the image onto the screen 2. Press the MENU button5. Select “Letterbox” with the cursor buttons 6. Press the MENU button to end when adjustment is completedThe “Aspect Ratio” to “Letterbox” for optimum projected image The menu disappears from the screenWhen lamp time exceeds 1000 hours REPLACING THE LAMP FOR SERVICE ONLYWhen lamp time exceeds 1900 hours When the lamp time exceeds 2000 hours1. Insert the power cord into the wall outlet RESETTING THE LAMP TIME FOR SERVICE ONLYTo ensure the lamp hours have been reset Caution for reset work2. Command Format 2-1 Command Data Format 1. Communication SpecificationsRS-232 EXTERNAL CONTROL 2-2 Response Data Format3. External Control Command Table Symptom TROUBLESHOOTINGSolution Probable CauseSolution SymptomRemote control unit does Probable CauseCause Contents WHAT TO DO WHEN THESE MESSAGES ARE DISPLAYEDMessage Please follow the procedures below » About Warning IndicatorsWARNING INDICATION » Action to be taken upon warning indicationsDIMENSIONS Vision Model 60 Projector SPECIFICATIONSVidikron 2900 Faber Street Union City, CA Ph 510 324-5900 / Fax 510 RUMA-011075 12-29-041-888-4-VIDIKRON