Vidikron VP-5000VHDA VHD Controller Front Panel, Slot 1 Not used Slot 2 Dual Hdmi input

Controls and Functions

2.2

VHD Controller Front Panel

1.SLOT 1 Not used.

2.SLOT 2 (Dual HDMI input)

HDCP-compliant digital video inputs. Connect the HDMI output from the VHD

Controller to input “A” in this slot.

3.PC IN Not used.

4.RS-232C (9-pin, male D-Sub)

Connect the RS-232 OUT port on the VHD Controller to this input.

5.POWER INPUT

Connect the PlasmaView VHD to AC power here.

Figure 2-5shows the controls and indicators on the VHD Controller front panel; the paragraphs that follow describe them.

Component SD NTSC	480i
16:9	VP-VHD

1 2 3

Figure 2-5. VHD Controller Front Panel

1.POWER BUTTON

Press once to toggle from standby mode to on mode. Press it again to return to standby mode. For a discrete on or off command, you can use the direct access buttons on the remote control.

2.IR SENSOR

Receives IR commands from the remote.

3.VACUUM FLUORESCENT DISPLAY

Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu or – if no menu is selected – the current source, signal format (NTSC or PAL), input resolution and aspect ratio.

8 Vidikron PlasmaView VHD Installation/Operation Manual