Vidikron VP-6500VHDA, VP-5000VHDA Using the VHD Controller Menus, Input Source Aspect Ratio

Operation

Press the MENU button on either the remote control or the VHD Controller front panel to display the Main Menu. To select a menu item, use the UP ( ) and DOWN ( ) buttons on either the remote control or the VHD Controller front panel to highlight it. Press ENTER to confirm your selection.

The PlasmaView VHD OSD menus are arranged hierarchically, as shown in Figure 4-1.Depending on the selected input source and signal characteristics, some menu options may not be available.

When the input signal resolution is 1080i analog (via the HD1 or HD2

Note input) or lower, the menus appear both on-screen and on the front-panel display of the VHD Controller as you navigate them:

4.3

Using the VHD Controller Menus

Input Source	↑
Aspect Ratio	↓

When the input signal resolution is 1080i digital or 1080p (via the HDMI1 or HDMI2 input), the menus appear on the front-panel display only.

Vidikron PlasmaView VHD Installation/Operation Manual 35