Installation
You can attach your optional mounts or stand to the PlasmaView VHD in either of two ways:
• While it is upright.
• As it lies flat with the screen face down. Place the protective sheet, which was wrapped around the plasma monitor when it was packaged, between the screen and your work surface to avoid scratching or otherwise damaging the screen surface.
In general, minimize or eliminate light sources directed at the display. Contrast ratio in your | Ambient Light |
images will be noticeably reduced if light directly strikes the display, such as when a shaft of |
|
light from a window or floodlight falls on the image. Images may then appear washed out |
|
and less vibrant. |
|
If you are mounting the PlasmaView VHD in an enclosure, leave sufficient space on all sides | Ventilation |
between it and surrounding objects, as shown in Figure |
|
disperse, maintaining the proper operating temperature. |
|
Vidikron PlasmaView VHD Installation/Operation Manual | 19 |
