Operation
Vidikron PlasmaView VHD Installation/Operation Manual 43
PRELIMINARY
Overscan: Image Overscan pushes the outside edge of the active picture area of the video
signal out beyond the edge of the display area.
Some television programs are produced based on the assumption that older television sets
may not display the outer edges of the broadcast picture area. Over scan effectively trims
away these inactive, outer edges and enlarges the remaining portion of the image to fill the
display area.
Select from 1% to 10% of Overscan, as desired.
For HDTV, DVDs and other video sources, Overscan is generally not necessary or desirable.
Memory PresetsFor each input, the PlasmaView VHD lets you save image quality settings as presets that you
can recall at a later time. You can create up to four presets per input and resolution. Use the
Memory Presets menu to recall saved image presets, or to save image settings in the
“Custom 1” or “Custom 2” memory location.
The currently-selected preset is indicated by a “7” to its left; in the example shown here, ISF
Night is selected.
You should save changes to any of the following settings to a preset; otherwise they will be
lost when a new input source or resolution is selected:
•Brightness
•Contrast
• Color saturation
•Tint
• Sharpness
To reset the Custom 1 and Custom 2/THX image presets to their factory defaults, select
Factory Default and press ENTER.
Information Select Information from the Main Menu to see information that uniquely identifies your
display: its serial number, the installed hardware and firmware versions and the firmware
version build date. Should you ever need to contact Vidikron Technical Support, this
information will help them answer your questions or resolve product performance issues.
Memory Presets
7ISF Night
ISF Day
Custom 1 Save
Custom 2 / THX Save
Factory Default
On the VP-6500VHD, “Custom 2” is labeled “THX.”
Note
Information
Serial Number
Hardware 0
Firmware 0100.0922
Date Feb 29 2008