ViewSonic PJ551, PJ501 manual Main Menu Actions/Description

MAIN Menu

To access the MAIN Menu, press the MENU button on the remote control. This projector has 6 menus: MAIN, PICTURE-1, PICTURE-2, INPUT, SCREEN and OPTION. To select a menu use the

/ buttons, then press the button or the ENTER button to select a menu item.

The MAIN Menu has seven (7) items as shown in the Table 4.

Please select the item you want to operate with the / buttons and

press the button or the ENTER button to start operating. Then you can operate corresponding to the following table.

Table 4: MAIN Menu

Item	Actions/Description
BRIGHT	Lighter	Darker
(Brightness)
CONTRAST	Stronger	Weaker
ASPECT	Select Aspect Ratio
(Aspect Ratio)	Select ASPECT from the MAIN menu and then do the following:
	For RGB Input or Hi-Vision 1035i/1125i/750p of COMPONENT VIDEO Input , press the		/
	button to select one of these options:

•4:3

•16:9

For VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input, press the / button to select one of these options:

	•	4:3
	•	16:9
	•	SMALL	(The SMALL option may not work properly with some input signals.)
	NOTE: You can also press the ASPECT button on the remote control to select the Aspect Ratio.
PICT. POSIT.	Select Picture Position (for 16:9/SMALL Picture)
(Picture Position)	Press the		/	button to select one of these options:

•TOP

•CENTER

•BOTTOM

GAMMA	Select Gamma Mode
	Press the		/	button to select one of these options:
	• NORMAL
	• CINEMA
	• DYNAMIC
MIRROR	Select Mirror Status:
	Press the		/	button to select one of these options:
	• NORMAL
	•	H:INVERT		(Horizontally Inverted image)
	•	V:INVERT		(Vertically Inverted image)
	•	H&V:INVERT		(Horizontally and Vertically Inverted image)

ViewSonic PJ501/PJ551 12