ViewSonic manual OPTION Menu, ViewSonic PJ501/PJ551

OPTION Menu

The OPTION menu has 5 items as shown in theTable 9.

Please select the item you want to operate with the / buttons and

press the button or the ENTER button to start operating. Then you can operate according to the following table.

Table 9: OPTION Menu

Item	Actions/Description
VOLUME	Adjust Volume: Loud	Quiet
AUTO OFF	Adjust AUTO OFF Time:

•Long (MAX. 99 min.)

•Short (Min. 1 min.)

•(DISABLE: 0 min.)

The system automatically enters the standby mode when no signal is received for the set time. When the DISABLE (0 min.) is selected this function is inactive.

WHISPER	Select WHISPER Mode:
	NORMAL		WHISPER
	The WHISPER mode is active when WHISPER is selected. In the WHISPER mode, acoustic
	noise level from the unit is reduced and the brightness level on screen is lowered.
LAMP TIME	Refer to Lamp Time: The starting of this item displays the time that the projector lamp has been
	used.
	Reset Lamp Time [Use this function only when the lamp is replaced!] : Keep pressing the
	RESET button for 3 seconds or more during the display of the lamp time. Then the menu for
	reset will appear. When you have replaced the lamp, select the RESET on the menu with the
	button.
	•	Do not reset the lamp time without replacing the lamp. Reset the lamp time always when
		replacing the lamp. The message functions will not operate properly if the lamp time is not
		reset correctly.
	•	Before replacing the lamp, carefully read the descriptions of "Lamp", "Lamp Life" and
		"Replacing the Lamp".
FILTER TIME	Refer to Filter Time: The starting of this item displays the time that the air-filter has been used.
	Reset Filter Time [Use this function only when the filter is replaced!] : Pres the RESET
	button for 3 seconds or more during the display of the filter time. Then the menu for reseting the
	filter time will		display. When you have replaced the filter, select the RESET on the menu with the
		button.
	•	Do not reset the filter time without replacing the filter. Reset the filter time always when
		replacing the filter. The message functions will not operate properly if the filter time is not reset
		correctly.
	•	Before replacing the air filter, carefully read the descriptions of "Air-Filter" and "Replacing the
		Filter" on page 20.

17 ViewSonic PJ501/PJ551