Settup and Operattiion

Starting and Shutting down the Projector

1. Connect the power cord to the projec- tor. Connect the other end to a wall outlet. (A)

Turn on the power switch. (B)

The Power LED and Lamp-ready LED turn on.

2. Remove the lens cover.

3. Turn on the connected devices.

4. Ensure the Lamp-ready LED is on a steady (not flashing) orange and then press the Power button to turn on the projector.

The projector splash screen displays and connected devices are detected. If the connected device is a PC, press the appropriate Fn hot keys on the computer keyboard to switch the dis- play output to the projector. (Check the PC user manual to determine the ap- propriate Fn hot keys to change display output.)

5. If more than one input device is con- nected, press the Source button repeatedly to switch among devices.

Splash Screen

6. To turn off the projector, press the Power button. When the “Power Off?/Press Power again” message ap- pears, press the Power button. The projector turns off.

Attention : Power off the projector normally and unplug the power cord before moving the projector

ViewSonic PJ766D

13

Page 19
Image 19
ViewSonic PJ766D-1 manual Starting and Shutting down the Projector