ViewSonic PJ766D-1 manual General Safety Information

General Safety Information

¾Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in the unit. For servicing, contact qualified service personnel.

¾Follow all warnings and cautions in this manual and on the unit case.

¾The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the lens when the lamp is on.

¾Do not place the unit on an unstable surface, cart, or stand.

¾Avoid using the system near water, in direct sunlight, or near a heating device.

¾Do not place heavy objects such as books or bags on the unit.

Power Safety

¾Only use the supplied power cord.

¾Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.

¾Remove the batteries from the remote control when storing or not in use for a prolonged period.

Replacing the Lamp

¾Replacing the lamp can be hazardous if done incorrectly.

¾Unplug the power cord.

¾Allow the lamp sufficient time to cool.

Cleaning the Projector

¾Unplug the power cord before cleaning.

¾Allow the lamp sufficient time to cool.

About this manual

This manual is intended for end users and describes how to install and operate the DLP projector. Wherever possible, relevant information—such as an illustration and its description—has been kept on one page. This printer-friendly format is both for your convenience and to help save paper and thereby protect the environment. It is suggested that you only print sections that are relevant to your needs.

ViewSonic PJ766D iii