![](/images/new-backgrounds/1176040/17604067x1.webp)
Status Menu
Press the Menu button to open the OSD menu. Press to move to the Status menu. Press
to
move up and down in the Status menu. Press to change values for settings, and then press En- ter to confirm the new setting.
ITEM | DESCRIPTION | DEFAULT |
|
|
|
Video | Displays the resolution and refresh rate of the connected video device. |
|
Information |
|
|
|
| These |
Active Source | Displays the active source. | |
|
| items are |
|
| |
Software | Information about the firmware version. | display |
Version |
| only. |
|
|
|
Lamp Hours | Number of hours lamp has been in Normal use and number of hours lamp |
|
| has been in Eco use. |
|
|
|
|
Lamp Mode | Choose among ECO and Normal lamp modes. ECO mode uses less power and | Normal |
| extends lamp life, but decreases lamp brightness. |
|
|
|
|
Lamp Hour | After replacing the lamp, this item should be reset. Refer to “Replacing the Pro- | — |
Reset | jection Lamp” on page 29. |
|
|
|
|
ViewSonic PJ766D | 28 |