Powering On/Off the Projector
Powering On the Projector
1.Remove the lens cap.
2.Securely connect the power cord and signal cable. When connected, the Power LED will flash blue.
3.Turn on the projector by pressing “ 
” button on the control panel. The Power LED will turn blue.
4.Turn on your source that you want to display on the screen (computer, note- book, video player, etc). The projector will detect the source automatically and will display on the screen.
5.If you connected multiple sources at the same time, press the “Source” button to switch between inputs.
1
2
15
