Copy files from computer
You can connect the digital photo frame to a computer copy files to the memory device connected to the digital photo frame or to the
1.Make sure that your computer has been started before you start.
2.Connect the mini plug of the USB cable to the mini USB port on digital photo frame, and push the other end into a free USB port on your computer.
3.The computer system detects “New hardware” and starts to install the driver automatically. Wait for the system to finish the installation. When it has finished, several “Removable Disk”, which indicate all drivers of the digital photo frame, will be created in “My computer”.
4.Drag and drop the files on your computer to the memory device connected to the digital photo frame or to the
5.To disconnect the USB cable from the computer, double click the Safely Remove Hardware icon on the task bar. Click the USB Mass Storage Device, and then click OK.
Note:
yMake sure no USB storage device is connected with the Digital Photo Frame before connecting to your computer.
yThe Digital Photo Frame must be plugged in and turned on before connecting to the computer.
yWhen connecting with a computer, the USB HOST driver is not available.
yDo not disconnect the USB cable or remove the card during files coping and transferring.
ySystem support: Windows® 2000/ XP/ VistaTM.
ViewSonic |
| ||
9 | |||
|
|
