Viking D3 manual Replacing Filter, Charcoal Filter

Replacing Filter

Charcoal Filter

Charcoal Filter, which was installed in your Built-in Microwave Hood, is used for nonvented, recirculated installation. The filter should be changed every 6 to 12 months depending on use.

1.Disconnect power to the oven at the circuit breaker panel or by unplugging.

2.Remove the two top louver mounting screws. (See illustration.)

3.Pull the louver away from the unit.

4.Remove the charcoal filter holder by removing the center mounting screw.

5.Change the charcoal filter.

6.Replace the filter holder and center mounting screw.

7.Carefully push the louver back into place and replace the screws removed in step 2.

	Screw
Charcoal filter
(white side faces front)
Screw	Screw
Louver

ProductCareCare

E 34