Oven Settings
Tones
This function allows you to define the duration of tones and the number of tones for different events. Your oven is programmed with different audible tones as demonstrated by the following chart:
|
| Description |
| Number | Duration |
|
| of tone | Used in… | of tones | (seconds) |
| |||||
|
|
|
|
|
|
|
| 1 Minute Left | Min/Sec or Cook Timer | 1 | 1 |
|
|
|
|
|
|
|
| Autostart | Cooking mode or | 2 | 0.1 |
Controls |
|
| timer starts without |
|
|
|
| pressing Set or Enter |
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
| End of Hold | Cook Time/Stop Time | 4 | 1 |
|
|
|
|
|
|
Product |
| Timer Expired | Min/Sec or Cook Timer | 3 | 1 |
|
|
|
|
| |
| Failure | RTD error/Latch error | 5 | 1 | |
|
| ||||
|
|
|
|
|
|
|
| Invalid Entry | Error in programming | 3 | 0.1 |
|
|
|
|
|
|
|
| Periodic Reminder | After cooking mode | 1 | 0.1 |
|
|
| finishes or during |
|
|
|
|
| programming to |
|
|
|
|
| prompt action by user |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Key Press | Information Entry | 1 | 0.1 |
|
|
|
|
|
|
|
| Invalid Key | Information Entry | 3 | 0.1 |
|
|
|
|
|
|
|
| Repeat Key | Information Entry | 0 | 0 |
|
|
|
|
|
|
|
| Oven Light Off | Turning light off | 2 | 0.1 |
|
|
|
|
|
|
|
| Oven Light On | Turning light on | 1 | 0.1 |
|
|
|
|
|
|
|
| Panel is Locked | Information Entry | 3 | 0.1 |
|
|
|
|
|
|
|
| Setpoint Reached | Cooking Modes | 1 | 1 |
|
|
|
|
|
|
|
| Meat Probe | Roasting Modes | 3 | 1 |
|
|
|
|
|
|
|
| Meat Probe within 10° | Roasting Modes | 2 | 1 |
|
|
|
|
|
|
|
| Searing Time Reached | Roasting Modes | 3 | 1 |
|
|
|
|
|
|
|
| Start Time Reached | VariousCookingModes | 1 | 1 |
|
|
|
|
|
|
|
| Panel is Unlocked | Information Entry | 2 | 0.1 |
|
|
|
|
|
|
Oven Settings
Tones (cont.)
To change the frequency and/or duration of any of the above tone signals:
1.Press “SETTINGS.” Settings menu will appear in display.
2.Press the up or down arrows until “TONES…” appears in the display.
3.Press “ENTER,” and “RESTORE FACTORY DEFAULTS: NO” appears on the display.
4.Scroll up or down using the arrow keys to find the Tone you would like to change and press “ENTER.” Display will flash and appear as follows:
“Short Key Entry: 5 sec”
Timeout | Duration of |
Name | Timeout |
5.Press “ENTER,” and the “1 x 1 SEC” value will flash.
6.Using the numeric keyboard, enter the number and the duration of tones desired. The number of tones can be a value from 0 to 9. The duration of tones is measured in tenths of a second. You can enter a number from 0.0 to 9.0.
7.Press “ENTER” when finished. The tone is customized to your preference. At this point the oven plays the new tone. If you do not like it, return to Step 1 to adjust the tone.
8.To exit the settings menu, press “SETTINGS.”
Product Controls
22 | 23 |