Viking F20481 Door Removal Side-By-Side, Remove top hinge covers by removing Phillips screws

Door Removal (Side-By-Side)

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

Some installations require

door/drawer removal to transport the refrigerator to its final location.

Make sure power cord is disconnected from power source.

5 6

Remove top hinge covers by removing Phillips screws.	Unscrew 5/16” hex head screws from right top hinge
	and remove hinge. Retain all screws for later use.

1 2

Remove toe grille. Grasp firmly and pull outward to	Open both doors 180°, or as wide as possible.
unclip.

3 4

NOTE: For refrigerators in operation, shut off water before	Close doors.
removing water line from the door. Push in white collar and
hold. Pull the door-side tube from the connector.

7 8

Lift right side refrigerator door from hinge pin. Remove	Disconnect wire harness on top of left side refrigerator
door closure from hinge pin on the right side. Retain
	door top hinge. Release two-pin connector by pressing
for later use.
	junction point with a flat blade screwdriver or fingernail.
	Green ground wire remains attached to the hinge.
9	10

Unscrew 5/16” hex head screws from left top hinge.	Lift left side refrigerator door, along with top hinge,
Retain all screws for later use.	from hinge pin.

24 25