Door Reinstallation (Side-By-Side)
1 | 2 | 7 |
8
Install hinges with Phillips screws.
3
Place hinge side of refrigerator doors on hinge pins.
4
Open doors as wide as possible.
9
Firmly push tube 5/8” into the connector. Use lines on the tube as a guide for full insertion. NOTE: If water line tube end is damaged, cut off 5/8” before reconnecting.
If leaking occurs, reconnect the line.
Install top hinges loosely with 5/16” hex head screws. | While holding refrigerator doors upright, tighten down | Replace toe grille. Align the toe grille mounting clips |
| top hinges with 5/16” hex head driver. | with the lower cabinet slots. Push the toe grille firmly |
|
| until it snaps into place. |
5 | 6 |
Reconnect | Replace top hinge covers. |
30 | 31 |
