Viking F20481 manual Freezer Drawer Reinstallation Bottom-Mount

Door Reinstallation (French Door Bottom-Mount)

1 2

Install center hinges with Phillips screws.	Place hinge side of refrigerator doors on center
	hinge pins.

3 4

Install top hinges loosely with 5/16” hex head screws.	While holding refrigerator doors upright, tighten down
	top hinges with 5/16” hex head driver.

5 6

Reconnect two-pin connector. Replace top hinge covers.

Freezer Drawer Reinstallation (Bottom-Mount)

1 2

Pull both rails out to full extension.	Insert the screws in the top of the drawer front into the
	slots in the drawer brackets.

3 4

Pull the drawer brackets toward you to position the	Completely tighten the four screws on both sides of
screw in the bottom of the drawer front into the	drawer.
brackets. Repeat for both sides of drawer.

5

Push drawer closed.

28 29