![](/images/new-backgrounds/1061867/6186723x1.webp)
Final Installation (36”W. Double)
Note: Purchase necessary gas kit –
1 | 2 |
Install upper oven as described on page 21, “Final | Place bottom oven on a protected area near the |
Installation” (36”W. single). | cabinet. Remove 2” hole knockout from oven top. |
Final Installation (36”W. Double) (cont.)
7 | 8 |
Remove all knobs, push buttons, bezels, and lower | Remove control box, disconnecting the |
access panel, side trim, and control panel. | three harness connectors. |
3
2 | 3 |
|
1
Remove access panel from oven side and
pipe plug from pipe tee.
4
2
1 | 3 |
|
Attach male connector to pipe tee. Feed flex tubing through 2” hole and attach to the male connector.
9 | 10 |
Connect gas line and check
for leaks.
2
1 3
Attach 8” pipe nipple through lower oven cabinet to upper oven pipe tee. Attach female connector to pipe nipple. Attach flex tubing to female connector.
5 | 6 |
1 |
| 2 |
Replace access panel. | Push lower oven straight into cabinet. |
11 | 12 |
Reconnect three harness connectors and | Replace side trim, control panel, lower |
replace control box. | access panel, control panel knobs, |
| push buttons, and bezels. |
22 | 23 |