Viking F20518A manual Final Preparation, Optional Center Trim Installation 36W. Double

Models: F20518A

1 14
Download 14 pages 61.67 Kb
Page 13
Image 13

Optional Center Trim Installation (36”W. Double)

Note: With purchase of DCT-VGSO-SS center trim kit.

1

2

o p t i o n

o p t i o n

Install mounting brackets.

Insert center trim piece over mounting brackets.

Door Replacement & Adjustment (36”W.)

Final Preparation

1. Some stainless steel parts may have a

plastic protective wrap, which must be

peeled off. All stainless steel body parts

should be wiped with hot soapy water

and with liquid cleaner designed for this

material. If build-up occurs, do not use

steel wool, abrasive cloths, cleaners or

powders! If it is necessary to scrape

stainless steel to remove encrusted

materials, soak with hot, wet cloths to

loosen the material, then use a wood or

nylon scraper. DO NOT use a metal knife,

spatula, or any other metal tool to scrape

stainless steel! Scratches are almost

impossible to remove.

1

2

2. The interior of the oven should be washed

thoroughly with hot, soapy water to

remove film residues and installation

debris before being used for food

preparation, then rinsed and wiped dry.

Solutions stronger than soapy water are

rarely needed.

1

2

Place door onto hinge arms.

Pull door stops up and slowly slide door down.

24

25

Page 13
Image 13
Viking F20518A manual Final Preparation, Optional Center Trim Installation 36W. Double, Door Replacement & Adjustment 36W