Viking RDECU2665BSB, RDECU2566BSB, RDECU2065BSB manual Proximity to Side Cabinet Installation

Clearance Dimensions (Proximity to Cabinets)

Clearance Dimensions (Wood/Composite Overlay)

Proximity to Side Cabinet Installation

•	The cooktop may be installed directly to
	existing base cabinets.
•	The cooktop CANNOT be installed
	directly adjacent to sidewalls, tall cabinets,
	tall appliances, or other side vertical
	surfaces above 36” (91.4 cm) high. There
	must be a minimum of 6” (15.2 cm) side
	clearance from the cooktop to such
	combustible surfaces above the
	36” (91.4 cm) counter height.
•	Within the 6” (15.2 cm) side clearance to
	combustible vertical surfaces above
	36” (91.4 cm), the maximum wall cabinet
	depth must be 13” (33.0 cm) and wall
	cabinets within this 6” (15.2 cm) side
	clearance must be 18” (45.7 cm) above
	the 36” (91.4 cm) high countertop.
•	Wall cabinet above the cooktop

Minimum Clearances from Adjacent Combustible Construction

•Above countertop 36” (91.4 cm) minimum

•Side 6” (15.2 cm)

•Rear 0” (0.0 cm)

•Within 6” side clearance. Wall cabinets no deeper than 13” (33.0 cm)

•Must be minimum 18” (45.7 cm) above countertop

•Wall cabinets directly above the product must be minimum 36” (91.4 cm) above the countertop

The bottom of a standard hood should be 30” (76.2 cm) min. to 36” (91.4 cm) max. above the countertop. This would typically result in the bottom of the hood being 66” (167.6 cm) to 72” (182.9 cm) above the floor. Refer to the rangehood installation instructions for additional information. These dimensions provide for safe and efficient operation of the hood.

Wo od/CompositeOverlay

(167.66”min.
6	cm)
to
(182.72”max.
9	cm)

24”
	.0	cm)
(61

30”min..
(7
6
	2	cm)
	to
36”max.
(9
1.
	4	cm)

must be a minimum of 36”

(91.4 cm) above the countertop

for a full width of the cooktop.

The minimum height requirement

does NOT apply if a rangehood is

installed over the cooking surface.

												.
											max
								13”			0	cm)
								(33		.						.
														min
					.
												36”			cm)*
		min										(91	.4
18”			c	m	)
(45	.7					6”
						(15.		min
						2
							cm)**		.

Wo od/CompositeOverlay

(167.66”min.
6	cm)
to
(18272”max. .
9	cm)

	30”
		.2	cm)
(76
	6”		)
			m
	.2 c
5
(1

Wall Installation

30”min. .
(7
6
	2	cm)
	to
36”max.
(9
1.
	4	cm)

		min		.
36”		4	cm)
(91	.

Dimensions shown are for use with combustible surfaces unless otherwise stated.

0”
(0		min.
.
	0
	cm)

	3
	-
(7		1/8”
.
	9
	cm)

*Note: 36” minimum unless using a hood.

**Note: Only applies to combustible surfaces.

***Note: Refer to installation of holddown brackets on page 13 for minimum clearances under counter

Island Installation

8 9