Viking InterWorks MAC OS

VIKING COMPONENTS 56K USB MODEM USER’S GUIDE

MacComCenter Communication Software (Continued)

3.Once the software for MacComCenter has been loaded, a modem description

window will appear. Click the “OK”button to continue with the software setup.

4.The “MacComCenter Assistant” will guide you through the rest of the setup pro-

cedure. Follow the onscreen instructions until the setup has been completed.

Your MacComCenter software installation is now complete.

Chapter 4

Contents

Main Table of Contents 1 Introduction Viking 56K USB Modem Features & Specifications 2 Before You Install System Requirements Phone Line Requirements Communications Software requirements 3 Hardware Installation Hardware Installation (Continued) 4 Software Installation Mac OS 8.5 or Later Driver Software Mac OS 8.5 or Later Driver Software (Continued) MacComCenter Communication Software Page Remote Access/Mac PPP Setup Free PPP Setup Using Data and Fax Communication Software Page 6 Troubleshooting Universal Serial Bus (USB) Basics General Troubleshooting 14 Problem Solution General (Continued) 15 Problem Solution 7 Basic AT Commands Guidelines Basic AT Command Set Page Page Page Page Page ECC Commands MNP 10 Commands MNP 10 Commands (Continued) Caller ID Commands Fax Class 1 Fax Class 2 Fax Class 2 (Continued) 8 Modem Driver & Firmware Upgrades 9 Contacting Technical Support Viking Components Technical Support Phone Number:888-801-9181 10 Communication Regulations INDUSTRY CANADA (IC) NOTICE PART 68 REQUIREMENTS PART 68 REQUIREMENTS (Continued) 11 Warranty & Disclaimers 5 YEAR WARRANTY