VIKING COMPONENTS 56K USB MODEM USER’S GUIDE
4 Software Installation
Once the Viking USBfax/modem is installed, you will need to install the software
necessary to communicate with the fax/modem. This chapter will cover the steps
necessary to configure your computer’s operating system.

Mac OS 8.5 or Later Driver Software

1. Insert the “VikingModem Companion Software” CD into your computer’s CD-
ROM drive. Once the CD appears on your system’s desktop,double-click on its
icon to open. Locate the “Viking Modem Installer”icon on the CD and double-click
on it to launch.
Note:If the CD can not be located, the drivers can be downloaded from the Viking
Components Web site at:www.vikingcomponents.com
3.Select “Viking 56K USB Modem” by clicking on its button. Then click the “Install”
button to begin the driver installation.
4.Once the driver installation is done, click the “Quit”button to leave the installer.
Chapter 4
6