VIKING COMPONENTS 56K USB MODEM USER’S GUIDE
3 Hardware Installation
This chapter contains instructions on installing your Viking 56K USB fax/modem.
Warning:The phone jack you use must be for an analog phone line. If
you are in an office building,it may use digital phone lines. If you are not
sure of the type of phone lines your office building has,contact your phone
system administrator.
1.Rest the modem on its side. Locate the two phone cord jacks toward the cen-
ter of the bottom panel. These jacks are interchangeable when connecting the
modem to a wall jack and a phone. Plug one end of a phone cord into one of the
jacks and the other end to the phone jack located on the wall. If you wish to use
your modem and phone through the same wall phone jack,plug the cord from
your phone into the remaining jack on the modem.
Note:You can not use the phone and the modem at the same time if they share
the same phone line.
Chapter 3
4