Manuals / Viper / Automotive / Remote Starter

Viper 5901 manual Charging the Battery, Low battery indicator

Models: 5901

1 60

Download 60 pages 2.17 Kb

Page 12

➢Charging the Battery

➢Charging the Battery

•Plug in the USB charger (alternately a standard mini USB cable connected to any standard USB port on any laptop or desktop computer can also be used (cable not included).

•The LCD displays “CHARGE” while the battery level bars within the battery icon flash.

•When charging is complete the LCD then displays “FULL”.

Note: If the battery has been severely discharged all remote functions are disabled for a short charge period. The battery status outline flashes and CHARGE is displayed on the LCD. Once the battery has accu- mulated enough charge for functionality, the LCD icons initialize with a beep sound, the battery status outline stops flashing and the remote becomes operational while still displaying CHARGE.

Warning! The temperature range over which the battery can be charged is 0ºC TO 45ºC (32ºF TO 113ºF). Charging the battery at temperatures outside this range may cause severe damage to the battery or reduce battery life expectancy.

➢Low battery indicator

When the batteries are low on the 2-way remote it emits two groups of beeps, the battery icon flashes and low battery is indicated, the alarm then emits an additional chirp upon disarming of the alarm to let you know its time to change the battery. When the battery is low on the 1-way remote, the remote responds the same way audibly.

Note: The Arm/Disarm chirps should be programmed ON for the alarm to emit any additional chirps during disarm. Ask your authorized dealer if you have any questions.

12	© 2008 Directed Electronics. All rights reserved.

Image 12

Viper 5901 manual Charging the Battery, Low battery indicator

Contents

Responder LC Model Security and Remote Start Owner’s Guide2008 Directed Electronics, Vista, CA G5702V Page Contents Limited lifetime consumer warranty 2-way remoteProgramming options Security & convenience expansionsGovernment regulations Remote ControlsControl Center except for the hand and wrists, to satisfy RF exposure complianceWarning! Safety first The following safety warnings must be observed at all timesBefore remote starting a manual transmission vehicle, be sure to Only remote start on a flat surfaceWARNING! It is the responsibility of the owner to ensure the parking/emergen- cy brake properly functions. Failure to do so can result in personal injury or prop- erty damage. We recommend the owner have the parking / emergency brake system inspected and adjusted by a qualified automotive shop biannually This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide What is included Your warrantyImportant information Replacement remote controls System maintenanceOut of Range Notification Charging the Battery Low battery indicatorBattery Replacement Multi-car control capabilityTwo Way Remote One Way RemoteResponder LC 2-Way Transmitter configuration LC 1-way companionaccess “Request temperature” or “Runtime remaining” press the but- ton the specified amount of times, and then hold Using the system Disarm Remote StartValet Take-Over Function shift Valet modeCar finder Cabin temperature Command Press and release one time, then Hold for 1.5 secondsFeedback Screen will display current in cabin temperature Notes Cabin temperature is displayed on the remoteAdditional arming features Arm FeaturesWhile the system is armed Silent armWarn-Away response is triggered by System override Modified Arming Modes Disarm Features Silent disarmAdditional remote start features Manual TransmissionTimer mode Command Press two-times and thenNotes Enables or disables the remote start timer mode Turbo Timer mode Runtime reset Runtime checkRear defogger Smart startTo activate the Smart Start Mode with a manual transmission will shut down when locking Auxiliary features Remote control feature programming Remote setup options You can save and exit the programming mode anytime by pressing theMenu option descriptions Remote start display Clock, temperature or runtime Sensor adjust Pair Remote ModeDemo Modes Safety features Starter anti-grind circuitryDisabling the remote start system Diagnostics Last triggerArming Disarming System status chirpsInterpreting zone diagnostics Table of zonesNuisance prevention circuitry Remote StartOwner recognition Rapid resume logicPower saver mode System2-way remote Programming options Siren tones and chirp volume The output of the RevengerSoft Security & convenience expansions Power Window Control Automatic power window control is provided with the 529T and 530T systems. These can operate power windows, and can roll them up automatically when the system is armed, roll them down, or both up and down Glossary of terms to the vehicle or glass LCD layout This feature is not available Quick reference guide Arming To arm, press . The system arms with 1 beep and siren toneSilent Arm Press one time and then press Disarming To disarm, press and you will hear 2 beeps and two siren tonesRear Defogger Limited lifetime consumer warranty A clear copy of the sales receipt, showing the following Page The company behind this system is Directed Electronics