Feature | Opt 1 | Opt 2 | Opt 3 | Opt 4 | Opt 5 |
Button press | On | Off | back |
|
|
beep |
|
|
|
|
|
System type | Remote start | Remote start | Back |
|
|
| & Security |
|
|
|
|
Clock set | Clock time | Back |
|
|
|
➢Menu option descriptions
•Auto keypad lock
Automatically locks the remote buttons when the buttons are not used for
60 seconds. Prevents “accidental” presses of the remote.
Press 
then 
to unlock the keypad.
Note: If the auto keypad lock feature is programmed On, the remote auto- matically unlocks when the vehicle ignition is turned Off. The remote stays unlocked to allow time to exit and unload the vehicle, and then lock the
doors with the remote. When the button is pressed, the keypad auto lock feature resumes normally.
•Page On or Off and Power save
When paging is “On” the remote checks the status of the system every four seconds, and reports any alarm triggers (if the system is within the operating range).
In the paging “Off” setting, the remote does not check the status of the system. In the paging Off mode the remote will only beep and report when a button on the remote is pressed.
In the “battery saver” mode, the remote goes into sleep mode if no buttons are pushed for 72 hours. The timer resets each time a button is pressed.
•Page Alert / Vibe/Beep Tone/Both or /Screen only
Receive command confirmations on the remote with vibrations, beeps or both, or with display only.
© 2008 Directed Electronics. All rights reserved. | 37 |
