Function shift, Valet mode

A U X Aux

Command: Press and hold for 1.5 seconds to activate the Trunk Release.

Feedback: The trunk icon appears and the re-

mote plays a short tone.

Notes: This is an optional feature. See your

sales rep/installer for details. The factory default icon and text is trunk.

The icon and text can be changed by your installer using the Bitwriter programming tool.

Function shift

Command: Press 1 to 4 times. (See Transmitter configuration table)

Feedback: Display shows a text message across the bottom for the command received.

Notes: Each Press then release, shifts the function of the com- mand button.

Command:	Press	two-times and then	.
Feedback: Unlock		Icon appears hollow	and
	text states Valet when entering Valet
	mode.
Notes:	Even if armed the remote beeps one
	time and the doors remain locked.
	When exiting Valet mode the Unlock

Icon appears solid, the text states Valet and the remote beeps two-times. The security system is disarmed but the doors are still locked.

20	© 2008 Directed Electronics. All rights reserved.