2.Turn the ignition on. Timer Mode is exited and the parking lights flash slowly four times.
Note: The Bitwriter can change the amount of times the remote start activates and, it can change the intervals between activations in timer mode.
Turbo Timer mode
Short run turbo mode keeps the engine running after arriving at your destination for a programmable period of 1, 3, 5 or 10 minutes. This allows the system’s timer to conveniently cool down the turbo after you have left the vehicle.
To activate Turbo Timer Mode with an automatic transmission:
1.Make sure the Turbo timer feature is turned on in the features grid.
2.Open the vehicle door.
3.While the vehicle is running; press the 
button twice followed
by the 
button.
4.The parking lights flash once and the remote plays the remote start activation tone confirming that the remote start is activated (the one way remote only flashes the parking lights).
5.Turn off the ignition (car stays running).
6.Exit the vehicle and arm the system.
7.At this point the vehicle stays running for the programmed run- time.
To activate turbo timer mode with a manual transmission:
1.Enter MTS mode with the door open.
2.Transmit the timer mode feature with the remote by pressing
two- times, and then 
.
3.After exiting the vehicle, lock the system and the vehicle remains running for the programmed runtime. (The remote start feature is
30 | © 2008 Directed Electronics. All rights reserved. |
