Visioneer 9020 manual To scan a 35mm slide or negative

20VISIONEER 9020 USB SCANNER INSTALLATION GUIDE

3.To scan a negative, first slide the filmstrip into the 35mm negative mask and center the frame you want to scan in the opening.

Then position that mask on the glass and align its square corner with the arrow on the scanner body. Make sure the text on the mask faces up.

The 35mm negative mask also has a calibration slot. Do not place items to be scanned in the calibration slot.

You’re now ready to scan the slide or negative.

To scan a 35mm slide or negative:

1.Start the PaperPort software and click the Twain icon on the toolbar.

The Visioneer Scan Manager Pro appears.

Tip: You can also start the Visioneer Scan Manager Pro from the scanner buttons by setting a button to “Configure Before Scanning.” See “Selecting New Options for the Buttons” on page 26.

2.Click the drop-down menu at the top of the Scan Manager Pro and choose the type of transparency to scan.

Scan 35mm Using:—choose this option to scan 35mm slide positives

Scan Negative Using:—choose this option to scan negative film or 35mm slide negatives