ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 51

Note: When you manually select an area, the settings on the other panels are for that selected area, not the whole image. For example, the histogram on the resolution panel and the response curve on the brightness and contrast panel refer to only your newly selected area.

A new Scan Info box for the area selected on the image.

The area you selected to scan.

4.If the dotted line is not exactly where you want it, put the pointer on the line and drag the mouse.

To use the pointer to drag the line, make sure the pointer button is selected at the top of the window.

5.To rotate the selected area 90 degrees, click Rotate 90 Degrees.

Page 55
Image 55
Visioneer 9020 manual Area you selected to scan