Visioneer MX 200 manual To install the software

CONNECTING TO A COMPUTER 37

INSTALL SOFTWARE ON YOUR COMPUTER

Before connecting your camera, you must install software on your computer. This is a one-time procedure that installs the TWAIN drivers and utility program that allow your camera to communicate with your computer via the USB cable.

To install the software:

1.Insert the installation CD that came with your camera into your computer’s CD-ROM drive.

The CD automatically starts.

Note: If the CD does not start, check the following:

■Make sure the CD drive’s door is completely shut.

■Click the My Computer icon on your desktop. Double- click the icon for your CD-ROM drive. From the list of files on the CD, double-click the file named SETUP.EXE.