Visioneer MX 200 manual Problem The flash doesn’t work

52VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE

Problem: The flash doesn’t work.

Possible Cause Solution

The flash is not turned on.

Ensure that the flash is set to the Automatic or Always On options. Refer to page 33.

The batteries are weak and the flash is unable to recharge.

Turn the camera off and wait a few seconds before turning it back on. If this doesn’t work, replace the batteries.

Problem: When turned on, the LED flashes green, red, orange, and green. Then the camera crashes.

Possible Cause Solution

The SmartMedia card is not inserted correctly.

Turn the camera off. Remove and reinstall the SmartMedia card, see page 9 for details.

Problem: The Digital Camera Utility will not run when the camera is set to PC mode.

Possible Cause Solution

The computer monitor’s display is set to less than 24 bit color depth.

Right-click your desktop and select Properties. On the Display Properties window, click the Settings tab. Set the Colors value to True Color (24 bit) or higher.