24VISIONEER MX 200 DIGITAL CAMERA USERS GUIDE

SET UP MODE

Set Up mode is used to configure your camera. When you turn the Mode dial to Set Up, the following menu displays on the LCD. Each menu option is described below.

Note: To exit a Set Up mode selection without saving changes, press the Delete button.

Delete All: This option is used to delete all images from the internal memory or the SmartMedia card. To determine, or change, the current memory type, refer to “Memory Type” on page 29.

1.From the Set Up menu, press the Up or Down buttons to select Delete All, and then press the Display button.

2.On the Delete All screen, press the Up or Down buttons to select No or Yes, and then press the Display button.

Format: This option is used to erase and reformat the SmartMedia card. You should occasionally format the SmartMedia card to ensure it functions optimally.

Page 30
Image 30
Visioneer MX 200 manual SET UP Mode