COPYING PHOTOS TO YOUR COMPUTER 41
COPYING PHOTOS TO YOUR COMPUTER
When connected to your computer, your digital camera behaves like any other drive attached to your computer.
There are two ways to copy photos from your camera to your computer: using Windows Explorer or using the Visioneer Digital Camera Utility software. The Visioneer Digital Camera Utility contains more options for copying and deleting photos.
Note: Before copying photos to your computer, you must install the software from the CD and setup your camera as new hardware on your computer. See page 37 and page 39 for details.
To connect your camera:
1.Connect the small connector of the USB cable to the USB port on the camera. See “Back View” on page 6 for the position of the USB port on the camera.
2.Connect the large end of the USB cable to an empty USB slot on your computer. To locate a USB slot, look for the USB icon next to the connection slot. 
3.Turn on the camera with the Mode dial set to any mode except PC. 
