CONFIGURING THE AUTOSCAN FEATURE 15

CONFIGURING THE AUTOSCAN FEATURE

When you first connect your scanner to a computer, the scanner’s OneTouch software configures the AutoScan feature to scan in black and white and send the scanned image to the PaperPort desktop. You can change the AutoScan settings by selecting new options from the Configuration dialog box.

To open the Configuration dialog box:

1.Use one of the following three methods.

On the Windows taskbar, click Start, point to Programs, point to ScanSoft PaperPort 8.0, and then click OneTouch Configure.

Right-click the Scanner icon on the right side of the Windows taskbar, and then click Configure from the shortcut menu.

Press the button on the scanner itself.

2.If not already selected, click the Scan tab on the Configuration dialog box to display available scanning configurations.

Page 19
Image 19
Visioneer Strobe XP 200 manual Configuring the Autoscan Feature, To open the Configuration dialog box