Visioneer Strobe XP 200 manual Scanning, Paper Return Options

STEP 3: PRINT GUIDES AND INSTALL OTHER SOFTWARE 11

Scanning

This section describes how to scan with your Strobe XP 200 scanner. There are two methods available for scanning documents, you can use the scanner’s AutoScan feature or scan from the PaperPort software.

Both methods scan equally well, so use the one with appropriate options for the item you are scanning.

•AutoScan—Using the AutoScan feature, simply insert a document in the scanner and it is automatically scanned using predefined settings. See “Scanning using the AutoScan Feature” on page 14.

•PaperPort software—When you start a scan from the PaperPort software you can select scanning options and preview the scanned image before starting to scan a document. See “Scanning from the PaperPort Software” on page 24.

Note: Always remove any staples or paper clips from documents before inserting them into the scanner. Staples and paper clips can jam the feed mechanism and scratch the internal components.

PAPER RETURN OPTIONS

The position of the paper return determines the path of the scanned document. You can set the paper return to feed documents back toward you, or straight through the scanner.