Visioneer Strobe XP 200 manual About the Configuration Dialog BOX

16VISIONEER STROBE XP 200 SCANNER INSTALLATION GUIDE

Select a software application to send the scanned document to.

ABOUT THE CONFIGURATION DIALOG BOX

The Configuration dialog box shows the current settings for AutoScan.

For example, the following figure shows the settings pre-selected when you first receive your scanner. AutoScan is set to scan the item with the configuration named Scan Document and then open the PaperPort desktop to display the scanned image. The Format and Page(s) option is set is to scan in the PaperPort image format.

Click this tab to set preferences.

Select a setting for scanning the item.

Select format and page(s) options for AutoScan.

The icons next to each Configuration indicate the type of scanning:

Color Black and White Grayscale

The options on the Configuration dialog box are:

Select Destination—This is the list of applications that can open to display the scanned image. To configure the list, click the Preferences tab at the top of the dialog box and select the desired option. See “Setting Preferences” on page 22 for more information.