RECALIBRATING YOUR SCANNER | 35 |
3.On the Scanners and Cameras Properties window, make sure the Strobe XP 200 scanner is selected, and then click Properties.
4.On the Strobe XP 200 Properties window, select the Advanced tab.
5.Click Calibrate on the Strobe XP 200 Properties window.
6.Place the calibration paper in the scanner face up, and then click OK to start the calibration.
7.When calibration is finished, click OK to acknowledge and close the completion message.
To recalibrate your scanner for Windows XP:
1.On the Windows taskbar, click Start, point to Settings, and then click Control Panel.
2.On the Control Panel, click Printers and Other Hardware, and then click Scanners and Cameras.
