Vivotek FD8161 manual Stream

VIVOTEK

Click Viewing Window to open the viewing region settings page� On this page, you can set the Region of Interest and the Output Frame Size for stream 1 ~ 3�

Please follow the steps below to set up those settings for a stream:

1� Select a stream which you want to set up the viewing region� If you want to stream out the video to a mobile device, please select stream 3�

2� Select a Region of Interest from the drop-down list. The floating frame, the same as the one in the Gloabl View window on the home page, will resize accordingly� If you want to set up a customized viewing region, you can also resize and drag the floating frame to a desired position with your mouse.

3� Choose a proper Output Frame Size from the drop-down list according to the size of your monitoring device�

■ The parameters of the multiple streams:

	Region of Interest	Output frame size
Stream 1	1600 X 1200 ~ 176 x 144 (Selectable)	1600 X 1200 ~ 176 x 144 (Selectable)
Stream 2	1600 X 1200 ~ 176 x 144 (Selectable)	1600 X 1200 ~ 176 x 144 (Selectable)
Stream 3	1468 x 1200 ~ 176 x 144 (Selectable)	176 x 144 (Fixed)
Stream 4	1600 X 1200 (Fixed)	1600 X 1200 (Fixed)

■The maximum Region of Interest of stream 3 is 1468 x 1200. You can also check the item "Set region to full view" to extend the region to full view (1600 x 1200). However, the image will be distorted a little bit�

When completed with the settings in the Viewing Window, click Save to enable the settings and click Close to exit the window. The selected Output Frame Size will immediately be applied to the Frame size of each video stream as shown on the next page. Then you can go back to the home page to test the e-PTZ function� For more information about the e-PTZ function, please refer to page 71�

User's Manual - 61