Vivotek FD8161 manual Media Settings, Media Type

1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. 10 pic. 11 pic. 10 pic. 12 pic. 13 pic. 14 pic. 15 pic.

Trigger Activation

■ File name prefix

Enter the text that will be appended to the front of the file name.

■ Add date and time suffix to the file name

Select this option to add a date/time suffix to the file name. For example:

Snapshot_20091104_100341

File name prefix Date and time suffix

The format is: YYYYMMDD_HHMMSS

Click Save to enable the settings, then click Close to exit the page.

VIVOTEK

Media Settings

Click Add Media on the Event Settings page to open the Media Settings page� On this page, you can specify the type of media that will be sent when a trigger is activated� A total of 5 media settings can be configured.

Media name: Enter a name for the media setting�

Media Type

There are three choices of media types available: Snapshot, Video Clip, and System log� Select the item to display the detailed configuration options. You can configure either one or all of them.

Snapshot: Select to send snapshots when a trigger is activated�

■Source: Select to take snapshots from stream 1 ~ 4.

■Send pre-event images

The Network Camera has a buffer area; it temporarily holds data up to a certain limit� Enter a number to decide how many images to capture before a trigger is activated� Up to 7 images can be generated�

■Send post-event images

Enter a number to decide how many images to capture after a trigger is activated� Up to 7 images can be generated�

For example, if both the Send pre-event images and Send post-event images are set to 7, a total of 15

images are generated after a trigger is activated�

User's Manual - 87