Vivotek H.264 manual Virtual input

VIVOTEK

http://<servername>/<network_http_s<0~m-1>_accessname>

For RTSP (MP4), the user needs to input the URL below into an RTSP compatible player.

rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>

“m” is the stream number.

For details on streaming protocol, please refer to the “control signaling” and “data format” documents.

8.22 Virtual input

Note: Change virtual input (manual trigger) status.

Method: GET

Syntax:

http://<servername>/cgi-bin/admin/setvi.cgi?vi0=<value>[&vi1=<value>][&vi2=<value>] [&return=<return page>]

	PARAMETER	VALUE	DESCRIPTION
	vi<num>	state[(duration)nstate]	Ex: vi0=1
			Setting virtual input 0 to trigger state
		Where "state" is 0, 1. “0”
			Ex: vi0=0(200)1
		means inactive or normal	Setting virtual input 0 to normal state, waiting 200
		state while “1” means	milliseconds, setting it to trigger state.
		active or triggered state.	Note that when the virtual input is waiting for next state,
		Where "nstate" is next	it cannot accept new requests.
		state after duration.
	return	<return page>	Redirect to the page <return page> after the request is
			completely assigned. The <return page> can be a full
			URL path or relative path according the current path. If
			you omit this parameter, it will redirect to an empty page.
	Return Code	Description
200		The request is successfully executed.

400The request cannot be assigned, ex. incorrect parameters. Examples: setvi.cgi?vi0=0(10000)1(15000)0(20000)1

No multiple duration. setvi.cgi?vi3=0

VI index is out of range. setvi.cgi?vi=1

124 - User's Manual