VIVOTEK
Installation
Hardware Installation
1.Loose the waterproof connector, then remove the rubber.
2.Loose the back cover.
3.Tear down the aluminum foil vacuum bag and take out the moisture absorber. Attach the supplied moisture absorber to the inner side of the Network Camera. (Please replace the moisture absorber with a new one if you open the back cover after installation.)
4.Make sure all cable lines are securely connected.
5.Tighten the back cover, rubber and waterproof connector.
6.Secure the Network Camera to the wall/ceiling by the supplied camera stand.
2
6
1
5 | Wall Mount | |
Ceiling Mount | ||
|
3
6 - User's Manual
