Vivotek MD8562, 8562D manual Completion, Fine-tune the Camera Focus

VIVOTEK

Fine-tune the Camera Focus

The focus of this network camera is set from 1.0m to infinity by factory default. If you want to focus on objects closer than 1.0m or the lens has lost focus, please fine tune it in the following way.

1.Loosen the lens lock screw under the lens module.

2.Manually rotate the lens to fine-tune the focus until the live image is clear.

3. Tighten the lens lock screw.

Tighten the lens lock screw.

Completion

Tear down the aluminum foil vacuum bag and take out the moisture absorber. Attach the supplied moisture absorber to the inner side of the dome cover. (Please replace the absorber whenever you open the dome cover.)

Attach the dome cover to camera. Secure the dome screws with the supplied screwdriver. Finally, make sure all parts of the camera are securely installed.

IMPORTANT!

Please secure the screws tightly to avoid moisture.

12 - User's Manual