VIVOTEK

Installing the Ground Wire

As shown in the figure below, secure one side of the supplied ground wire to the screw hole, route the wire, and attach the other end to a junction box or a grounded conduit.

Network Deployment

Setting up the Network Camera over the Internet

General Connection (without PoE) (MD8562D)

1.If you have external devices such as sensors and alarms, connect them to the general I/O terminal block.

2.Connect the camera to a switch via Ethernet cable.

3.Connect the power cable from the Network Camera to a power outlet.

+: Digital input - : Digital input

1

2

Ethernet Switch

3 NOTE:

The power adapter should comply with L.P.S. regulations featuring O/P: 12V DC, 1.5A min.

User's Manual - 7

Page 7
Image 7
Vivotek 8562D, MD8562 manual Network Deployment, Installing the Ground Wire