Vivotek 8562D, MD8562 7.9 Video input preview

VIVOTEK

132 - User's Manual

enablewdr <boolean> 0 4/4 Enable/disable wield dynamic

range. (not used in MD8562)

whitebalance auto, manual manual 4/4 “auto” indicates auto white

balance.

“manual” indicates keep current

value.

rgain 0~100 52 4/4 Manual set rgain value of gain

control setting.

bgain 0~100 47 4/4 Manual set bgain value of gain

control setting.

irismode fixed, indoor,

outdoor

fixed 4/4 Video Iris for DC Iris.

wdrc_mode 0~3 0 4/4 WDR enhanced.

0: off

1: auto

2: always on

3: keep current value

wdrc_strength 0~2 1 4/4 WDR enhanced.

0: low

1: medium

2: high

7.9 Video input preview

The temporary settings for video preview

Group: videoinpreview

NAME VALUE DEFAULT SECURITY

(get/set)

DESCRIPTION

exposuremode auto,fixed auto 4/4 Exposure Mode

minexposure 1~32000 32000 4/4 Minimum exposure time.

maxexposure 1~32000 30 4/4 Maximum exposure time.

exposurelevel 0~12 6 4/4 Exposure level

enableblc <boolean> 0 4/4 Enable backlight compensation.

enablewdr <boolean> 0 4/4 Enable/disable wield dynamic

range. (not used in MD8562)

irismode fixed, indoor,

outdoor

fixed 4/4 Video Iris for DC Iris.

wdrc_mode 0~3 0 4/4 WDR enhanced.

0: off

Contents

Main Page Revision History Overview Read Before Use Package Contents Physical Description Inner View Outer View General I/O Terminal Block SD/SDHC Card Capacity Installation Hardware Installation Page Network Deployment Setting up the Network Camera over the Internet Page Set up the Network Camera through Power over Ethernet (PoE) (MD8562) Software Installation Ready to Use Adjusting the Lens To adjust the viewing angle Fine-tune the Camera Focus Completion Tighten the lens lock screw. Accessing the Network Camera Using Web Browsers Page Page Using RTSP Players Using 3GPP-compatible Mobile Devices Using VIVOTEK Recording Software Main Page Conguration Area Hide Button Resize Buttons Live Video Window The following window is displayed when the video mode is set to MPEG-4: Page The following window is displayed when the video mode is set to MJPEG: Client Settings Page Conguration System System Time Homepage Layout Theme Options Page System Log System > Parameters System > Maintenance Page Page Page Security HTTPS (Hypertext Transfer Protocol over SSL) https:// Page Page Page Access List Filter Type Page Page Page Network PPPoE (Point-to-point over Ethernet) Page Page Page Page Streaming protocols - HTTP Page RTSP Streaming Page Page Page DDNS Page Page SNMP (Simple Network Management Protocol) Media > Image x 1.5 Preference Page Page Page Page Media > Video Stream settings Page Page Page Audio Settings PTZ > PTZ settings x2.0 Page Event > Event settings Page Page Add server Page Page Page Add media Page Page Page Page Applications - Motion Detection Page Applications - DI and DO Applications - Tampering detection Recording > Recording settings Page Page Page Page Local Storage Page Page Page Appendix URL Commands for the Network Camera Overview Style Convention 3. General CGI URL Syntax and Parameters 4. Security Level 5. Get Server Parameter Values Example: Request IP address and its response 6. Set Server Parameter Values [<parameter pair>] Only the parameters that you set and are readable will be returned. 7. Available parameters on the server Page 7.1 system Page Page Page 7.1.1 system.info 7.2 status 7.3 digital input behavior define 7.4 digital output behavior define 7.5 security 7.6 network 7.6.1 802.1x 7.6.2 QOS 7.6.3 IPV6 7.6.4 FTP 7.6.5 HTTP 7.6.6 HTTPS port 7.6.7 RTSP 7.6.7.1 RTSP multicast 7.6.8 SIP port 7.6.9 RTP port 7.6.10 PPPoE 7.7 IP Filter 7.8 Video input 7.8.1 Video input setting per channel Page Page Page Page 7.8.1.1 Alternative video input profiles per channel 7.9 Video input preview 7.10 IR cut control 7.11 Image setting per channel 7.12 Image setting for preview 7.13 Exposure window setting per channel Page 7.14 Audio input per channel 7.15 Time Shift settings 7.16 Motion detection settings 7.17 Tempering detection settings 7.18 DDNS 7.19 Express link 7.20 UPnP presentation 7.21 UPnP port forwarding 7.22 System log 7.23 camera PTZ control 7.24 UART control 7.25 SNMP 7.26 Layout configuration 7.27 Privacy mask 7.28 Capability Page Page Page Page Page 7.29 Customized event script 7.30 Event setting Page Page 7.31 Server setting for event action 7.32 Media setting for event action Page 7.33 Recording Page 7.34 HTTPS 7.35 Storage management setting 7.36 Region of interest 7.37 ePTZ setting Page 8. Useful Functions 8.1 Drive the Digital Output (capability.ndo > 0) 8.2 Query Status of the Digital Input (capability.ndi > 0) 8.3 Query Status of the Digital Output (capability.ndo > 0) 8.4 3D Privacy Mask 8.5 Capture Single Snapshot 8.6 Account Management 8.7 System Logs 8.8 Upgrade Firmware 8.9 Camera Control (capability.ptzenabled) Page 8.10 ePTZ Camera Control (capability.eptz > 0) Page 8.11 Recall (capability.ptzenabled) 8.12 ePTZ Recall (capability.eptz > 0) 8.13 Preset Locations (capability.ptzenabled) 8.14 ePTZ Preset Locations (capability.eptz > 0) 8.15 IP Filtering 8.16 UART HTTP Tunnel Channel (capability.nuart > 0) 8.17 Event/Control HTTP Tunnel Channel (capability. evctrlchannel > 0) 8.18 Get SDP of Streams 8.19 Open the Network Stream 8.20 Senddata (capability.nuart > 0) 8.21 Storage managements (capability.storage.dbenabled > 0) Page 8.22 Virtual input (capability.nvi > 0) Page Page 8. 24 Open Anystream (capability.nanystream > 0) Page Page Page Technology License Notice MPEG-4 AAC Technology MPEG-4 Visual Technology AMR-NB Standard Electromagnetic Compatibility (EMC)