Manuals / Vivotek / Photography / Security Camera

Vivotek PZ7132 manual RTSP port /RTP port for video, audio/ RTCP port for video, audio

Models: PZ7132

1 130

Download 130 pages 59.94 Kb

Page 43

RTSP port /RTP port for video, audio/ RTCP port for video, audio

VIVOTEK

RTSP port /RTP port for video, audio/ RTCP port for video, audio

■RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port number is set to 554.

■The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.

■The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by monitoring Internet traffic volume. By default, the RTCP port for video is set to 5557 and the RTCP port for audio is set to 5559.

The ports can be changed to values between 1025 and 65535. The RTP port must be an even number and the RTCP port is the RTP port number plus one, and thus is always odd. When the RTP port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, the following warning message will be displayed:

Multicast settings for stream 1 / Multicast settings for stream 2: Click the items to display the detailed configuration information. Select the Always multicast option to enable multicast for stream 1 or stream 2.

Unicast video transmission delivers a stream through point-to-point transmission; multicast, on the other hand, sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address. Therefore, enabling multicast can effectively save Internet bandwith.

The ports can be changed to values between 1025 and 65535. The multicast RTP port must be an even number and the multicast RTCP port number is the multicast RTP port number plus one, and is thus always odd. When the multicast RTP port changes, the multicast RTCP port will change accordingly.

If the multicast RTP video ports are incorrectly assigned, the following warning message will be displayed:

Multicast TTL [1~255]: The multicast TTL (Time To Live) is the value that tells the router the range a packet can be forwarded.

User's Manual - 43

Image 43

Vivotek PZ7132 manual RTSP port /RTP port for video, audio/ RTCP port for video, audio

Contents

Page VIVOTEK Table of Contents2 - Users Manual Overview Package contentsRead before use General I/O Terminal Block Physical DescriptionFront Panel Rear Panel+12V DI/DO DiagramStatus LED Please refer to the following illustration for the connection method6 - Users Manual Hardware ResetHardware Installation Installationoptional, not included in the package Network Deployment Setup the Network Camera over the InternetInternet connection via a router Internet connection via PPPoE Point-to-Point over Ethernet Internet connection with static IPWhen using a PoE-enabled switch Set up the Network Camera through Power over Ethernet PoE PZ7131 onlyWhen using a non-PoE switch Set up the Network Camera through Wireless Connection PZ7132 only Software Installation Using Web Browsers Accessing the Network Camera1. Choose Tools Internet Options Security Custom Level Using RTSP Players Using 3GPP-compatible Mobile Devices VIVOTEK Using VIVOTEK Recording SoftwareUsers Manual Camera Control Area Main PageVIVOTEK INC. Logo Host NameLive Video Window Configuration Area20 - Users Manual Time The following window is displayed when the video mode is set to MJPEGButtons MPEG-4 Media Options Client SettingsMPEG-4 Protocol Options MP4 Saving Options Basic Mode ConfigurationAdvanced Mode SystemSystem DI and DO System TimeManage User Root PasswordSecurity Manage PrivilegeCreate self-signed certificate automatically Enable HTTPSCreate and Install Certificate Method HTTPS Hypertext Transfer Protocol over SSLhttps//192.168.5.151/index.html https30 - Users Manual Create self-signed certificate manuallyVIVOTEK 4. The pop-up window shows an example of a certificate requestUsers Manual How do I cancel the HTTPS settings? Network Type NetworkError Router does not support UPnP port forwarding PPPoE Point-to-point over EthernetSteps to enable UPnPTM user interface on your computer 5. Click Next in the following window Refer to Ethernet Link-global IPv6 address/network mask Enable IPv6Link-local IPv6 address/network mask Please follow the steps below to link to an IPv6 address In LAN http//192.168.4.160 or http//192.168.4.1608080 HTTPTwo way audio HTTPSPage RTSP Streaming RTSP port /RTP port for video, audio/ RTCP port for video, audio Wireless LAN PZ7132 only Network Key Enter a key in either hexadecimal or ASCII format 3. WPA-PSK Use WPA Wi-Fi Protected Access pre-shared key DDNS DDNS Dynamic domain name serviceSafe100.net dyn-interfree.it visit http//dyn-interfree.it CustomSafe100General Settings Access ListFilter IP address 192.168.2.x will be bolcked Administrator IP addressAudio and Video Video Settings120735 2009/04/24 Image Settings54 - Users Manual Sensor SettingsVideo quality settings for stream 1 / stream 2 Advanced mode 56 - Users Manual Audio Settings Motion Detection How does motion detection work? Camera Control Preset LocationsReturn to Home Position while Idle Patrol Settings62 - Users Manual The Preset Locations will be displayed on the Home pageClick Go to The Network Camera will move to the preset location VIVOTEKPreview Homepage LayoutLogo Theme Options Follow the steps below to set up the customed homepage Customized Script ApplicationEvent Settings Video motion detection TriggerSpecify the period for the event Select the days of the week Event ScheduleAction VIVOTEK Here is an example of Event Settings page70 - Users Manual Here is an example of Application page with an event setting Server Type Server SettingsServer address Enter the domain name or IP address of the FTP server 74 - Users Manual Page Trigger Activation Click to delete all recorded data You can continue to select a server and media type for the eventClick to delete selected items The format is YYYYMMDD Click to open the directoryClick to go back to the previous level of the directory The format is HH 24rClick to open the file list of that hour Click to delete selected items Click to delete all recorded dataRecording Recording SettingsNetwork Storage Setting Recording Settings Recording name Enter a name for the recording setting Remote Log System LogCurrent Log VIVOTEK View ParametersUsers Manual Reboot MaintenanceRestore Export / Upload Files Calibrate86 - Users Manual Upgrade Firmware Style Convention URL Commands for the Network CameraAppendix OverviewVIVOTEK General CGI URL syntax and parametersSecurity level Get server parameter values90 - Users Manual Example request IP address and it’s responseVIVOTEK parameter pairMethod GET/POST Set server parameter valuesupdate VIVOTEKVIVOTEK Available parameters on the serverparameter pair Only the parameters that you set and readable will be returned240 GMT-0600 Central America, Central do not use “skip to invoke default server”VIVOTEK Users Manual94 - Users Manual VIVOTEKRestart the server after value seconds if parameters will be restored to default valueVIVOTEK Users Manual96 - Users Manual VIVOTEKUsers Manual VIVOTEKGroup dii0~ndi-1 capability.ndi Group doi0~ndo-1 capability.ndo21, 1025~65535 VIVOTEK98 - Users Manual 1 = get ipaddress, subnet, router, dns1, dns2 fromUsers Manual VIVOTEK443, 1025 ~ VIVOTEK Group wireless100 - Users Manual Users Manual VIVOTEKWEP key1 for encryption The valid characters are A-Z a-zGroup ipfilter VIVOTEK102 - Users Manual The period of intra frame in milliseconds VIVOTEKUsers Manual To customize video quality first or video104 - Users Manual VIVOTEKaac4, gamr Group imagepreview Preview of adjusting white balance of imageRestore of adjusting white balance of image VIVOTEK106 - Users Manual VIVOTEKGroup upnppresentation Group upnpportforwardingpreseti0~19zoom preseti0~19nameThe axis x coordinate of each preset location The axis y coordinate of each preset locationGroup capability VIVOTEK108 - Users Manual 0fields are valid VIVOTEKBit 9 = Reserved bit Invalidate lenspan Lenstilt, lenszoon, lensfocus, leniris110 - Users Manual VIVOTEKindicate whether to support headphone output VIVOTEKUsers Manual indicate whether to support server push motionGroup eventi0~2 VIVOTEKUsers Manual This field is required when trigger condition is “di”This field is used when trigger condition is “seq” VIVOTEKGroup serveri0~4 VIVOTEK114 - Users Manual Users Manual VIVOTEK116 - Users Manual VIVOTEKVIVOTEK Method GET/POST Drive the digital outputQuery status of the digital input VIVOTEKhttp//myserver/cgi-bin/dido/getdi.cgi?di1 Query status of the digital outputVIVOTEK di0=state\r\n di1=state\r\n di2=state\r\n di3=state\r\nVIVOTEK Capture single snapshotresolution resolutionMethod GET/POST Account managementVIVOTEK binary JPEG image datahttp//servername/cgi-bin/admin/upgrade.cgi Upgrade firmwareSystem logs http//servername/cgi-bin/admin/syslog.cgiUsers Manual Camera ControlVIVOTEK Method GET/POSTreturn page RecallSystem Information VIVOTEKmm is minor version from 00 ~ Preset LocationsVIVOTEK MMmm, MM is major version from 00 ~126 - Users Manual IP filteringVIVOTEK Method GET/POSTMethod GET/POST Get SDP of StreamingsOpen the network streamings VIVOTEK128 - Users Manual Technical SpecificationsAccessories VIVOTEKAMR-NB Standard Technology License NoticeMPEG-4 AAC Technology MPEG-4 Visual TechnologyLiability Electromagnetic Compatibility EMCFCC Statement CE Mark Warning