VIVOTEK
Installation
Hardware Installation
Follow the steps below to install the Network Camera to the ceiling:
1.Attach ceiling mount bracket A to the Network Camera and secure it with two small screws.
2.Drill three pilot holes into the ceiling; hammer the plastic anchors into the holes.
3.Fasten ceiling mount bracket B to the ceiling with three screws.
4.Slide the Network Camera into ceiling mount bracket B.
5.Secure ceiling mount bracket A and B with a small screw.
2
4
3
1 | 5 |
AB
NOTE
►If you want to install the Network Camera on the wall, please use the wall mount bracket
(optional, not included in the package).
User's Manual - 7
