VIVOTEK
Hardware Reset
Ext. Int.
Mic. In
12VDC | Ethernet | Ext. I/O |
Audio
Out Ext. Int.
The reset button is used to reset the system or restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after rebooting, restore the factory settings and install again.
Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the Network Camera to reboot.
Restore: Press and hold the recessed reset button until the status LED rapidly blinks red and green simultaneously. Note that all settings will be restored to factory default.
6 - User's Manual
