Vivotek PZ7132 manual Patrol Settings, Return to Home Position while Idle

VIVOTEK

Patrol Settings

You can select preset locations for the Network Camera to patrol.

Please follow the steps below to set up a patrol schedule:

1.Click a preset location on the list and click Select.

2.The selected preset locations will be displayed on the Selected locations list.

3.Set the Dwelling time for the preset location during auto patrol. The default value is 10 seconds. You can also manually set a value and click Update.

4.Repeat step 1 and 3 to select additional preset locations.

5.If you want to delete a selected location, select it from the list and click Remove.

6.Select a location and click Up or Down to rearrange the patrol order.

7.Adjust the Auto pan/patrol speed. (1~5 seconds)

8.Click Save to enable the settings.

1

2

5

6

8

7

3

Return to Home Position while Idle

If you select this option, the Network Camera will automatically return to the home position after idling for a specific time span. Please remember to click Save to enable the settings.

User's Manual - 61