Vivotek PZ7132 manual Configuration Area, Live Video Window

VIVOTEK

Pan: Click this button to start the auto pan. When the current position is Home or on the left side of Home, the camera starts panning from the current position to the left-most position, then to the right- most position, and finally backward to the original position. When the current position is on the right side of Home, the camera starts panning from the current position to the right-most position, then to the left- most position, and finally backward to the original position.

Stop: Click this button to stop the Auto Pan and Auto Patrol functions.

Patrol: Once the Administrator has determined the list of preset positions, click this button to command the camera to patrol among those positions on the Patrol List. For more information, please refer to Camera control of Configuration on page 60.

Pan /Tilt speed: Adjust the speed of pan/ tilt.

Pan speed	Tilt speed
-5	-5	Slower
-4	-4
-3	-3
-2	-2
-1	-1
0	0
1	1
2	2
3	3
4	4	Faster
5	5

Configuration Area

Client Settings: Click this button to access the client settings page. For more information, please refer to Client Settings on page 22.

Configuration: Click this button to access the configuration page of the Network Camera. It is suggested that a password be applied to the Network Camera so that only the administrator can configure the Network Camera. For more information, please refer to Configuration on page 24.

Language: Click this button to choose a language for the user interface. Language options are available

in: English, Deutsch, Español, Français, Italiano, 日本語, Português, 簡体中文, and 繁體中文.

Live Video Window

■The following window is displayed when the video mode is set to MPEG-4:

	MPEG-4 Protocol and Media Options
Video Title		Time
Title and Time
	Video 13:32:09 2008/12/01

Video and Audio Control Buttons Drop-down List of Preset Positions

User's Manual - 19