Cdp, Sdrr = Ldid, Tktp = ADM | Nortel Networks Remote Gateway 50

Page 234 of 258 Emergency Services configuration

b.Configure the ESN Special Number at the main office. For information on configuring ESN, refer to Basic Network Features (553-3001-379).

i.Configure the Digit Manipulation Index in LD 86 with the DGT feature.

LD 86 – Configure Digit Manipulation Index.

Prompt	Response	Description

REQ	NEW	Add new data.
CUST	xx	Customer number as defined in LD 15
FEAT	DGT	Digit manipulation data block
DMI		Digit Manipulation Index numbers
	(0)	No digit manipulation required.
	(0)-31	CDP
	(0)-255	NARS and BARS
	(0)-999	NARS and BARS with FNP
		DMI is only prompted when the Directory Number
		Expansion (DNXP) package 150 is equipped and
		SDRR = LDID.
		The maximum number of Digit Manipulation tables is
		defined by prompt MXDM. DMI is not prompted if route
		TKTP = ADM.
DEL	(0)-19	Number of leading digits to be deleted
INST	x...x	Insert. Up to 31 leading digits can be inserted.
CTYP	<cr>	Call type to be used by the manipulated digits. This call type
		must be recognized by the far-end switch.